UTV Inc

COPPERTOWN CONCEPTS SPRING CLEAN MICROFIBER TOWEL & HOLDER

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • COPPERTOWN CONCEPTS SPRING CLEAN MICROFIBER TOWEL & HOLDER
  • COPPERTOWN CONCEPTS SPRING CLEAN MICROFIBER TOWEL & HOLDER
  • COPPERTOWN CONCEPTS SPRING CLEAN MICROFIBER TOWEL & HOLDER

COPPERTOWN CONCEPTS SPRING CLEAN MICROFIBER TOWEL & HOLDER

Quick Overview

CopperTown Concepts is proud to announce their latest product Spring Clean. This simple spring secures a microfiber towel at an arms reach to remove dust off your ride. Use the towel to clean your windshield, goggles, GPS screen, mirrors, even your plastic panels.

The Spring Clean comes with a microfiber towel, rubber tipped spring, billet mounting cup, and 1/4" hardware to mount it with. Simply drill a 1/4" hole in you dash, center console, overhead console even a blank switch cutout. All you need to do is bend the spring over and insert a screwdriver to hold the machine screw, then install the nyloc nut and washer on the back side and tighten.

Once your Spring Clean is installed all you need to do is pull gently on the spring and insert the included microfiber towel. Its that quick and easy you can do it one handed. The towel stays in place until you just pull on the towel for use then reinsert it into the Spring Clean when finished.

Availability: In stock

Only 3 left

$14.95
OR

Details

CopperTown Concepts is proud to announce their latest product Spring Clean. This simple spring secures a microfiber towel at an arms reach to remove dust off your ride. Use the towel to clean your windshield, goggles, GPS screen, mirrors, even your plastic panels. The Spring Clean comes with a microfiber towel, rubber tipped spring, billet mounting cup, and 1/4" hardware to mount it with. Simply drill a 1/4" hole in you dash, center console, overhead console even a blank switch cutout. All you need to do is bend the spring over and insert a screwdriver to hold the machine screw, then install the nyloc nut and washer on the back side and tighten. Once your Spring Clean is installed all you need to do is pull gently on the spring and insert the included microfiber towel. Its that quick and easy you can do it one handed. The towel stays in place until you just pull on the towel for use then reinsert it into the Spring Clean when finished.

Additional Information

Category_ids N/A
SKU 4372

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.


Shipping Cost Calculator

Destination

Enter destination to get a shipping cost

Shipping Rates